Industrial Case Studies

Nooter/Eriksen Water Solutions and HydroFLOW were featured in RMEL's Electric Energy magazine for optimizing power plant cooling systems.

Following the successful test, the client purchased four HydroFLOW units.

The study's conclusions state that Hydropath technology greatly helps with reduction of biofouling.

14-week product evaluation to determine if a HydroFLOW i150 water conditioning device can optimize the performance of the DAF process.

A 3,942 Megawatt nuclear power plant was looking for alternatives to chemical treatment in their administrative building's cooling tower/chiller systems.

Seven weeks after the installation of HydroFLOW, no new scale formed in the dephlegmator. Existing scale was “softer” and noticeably thinner.

“Operators noticed BFP operations run more consistently after installing HydroFLOW, requiring less maintenance and adjustments.”

"The HydroFLOW product, powered by Hydropath technology, showed to be extremely innovative with field data supporting the claims of removing struvite build-up in pipelines."

This document comes to provide a brief overview of the progress made within the power generation sector in Asia.

HydroFLOW Third Party Verification Report-Augusta

"I'm very pleased with HydroFLOW's results. Instead of dreading it, I'm actually looking forward to the next state inspection!"

HydroFLOW contributed to less polymer use and drier cake at the Somersworth, NH, wastewater treatment plant.

Hydropath Technology can be recommended as a chemical-free method of treating limescale related problems at a paper mill bleach plant.

"HydroFLOW solved the algae problem in our cooling towers."

"The HydroFLOW device not only reduced the rate of struvite accumulation, it actually started to soften-up existing deposits!"

Conducting a final inspection was not required because there was no drop in water flow due to HydroFLOW's ability to keep the pipe free of scale accumulation.

HydroFLOW's ability to enhance the flocculation of suspended solids allowed a significant reduction in polymer usage.

Hydropath technology can be recommended as a chemical-free method of inhibiting Microbial Induced Corrosion (MIC).

The efficiency of the 60 HP low-pressure steam boiler is expected to further increase as scale continues to be removed from the system.

HydroFLOW Thrid Party Verification Report-Tulsa

HydroFLOW improves control of bacterial contamination while reducing operating costs.

The HydroFLOW water conditioner reduced buildup of deposits, silt and biofilm in the heat-exchangers.

The clean inspection section remained free of scale. Existing scale is very soft, does not restrict effluent flow and can be readily removed.

The water conditioners have a positive effect on heat exchanger performance by breaking-up the scale deposits.

The HydroFLOW device has shown that it can improve and save costs during the concrete production process.

After HydroFLOW was installed, the chemical dosage was totally eliminated, and no hard scale was found inside the condenser and cooling tower.

The effect of HydroFLOW on Struvite in Wastewater Treatment Plants.

Second Assessment of Hydropath Technology for Membrane Fouling and Scaling Control During Brackish Groundwater Desalination.

First Assessment of Hydropath Technology for Membrane Fouling and Scaling Control During Brackish Groundwater Desalination.

After 5 weeks of installation, No accumulation on 12” x 12” section. Struvite removal is slow yet noticeable.

Within 8 days we saw that the struvite has stopped accumulating and was softening up. We found that struvite problems can be greatly alleviated with this technology.

Biofilm reduction letter from Avantor - Poland. Avantor is an American Fortune 500 company.

Steel manufacturing and processing facility located in Ontario, Canada with scale issues on their galvanizing line.